|
HBA's & Switches
Emulex HBA's
 Sunstar Company
is proud to be an Emulex partner!
LP8000 LightPulse 1Gb/s Fibre
Channel PCI Host
Bus Adapter
 |
Major Features
- simultaneous full duplex 1Gb/s Fibre Channel delivers up to
200MB/s
- full fabric support using F_Port and FL_Port connections
- onboard hardware context cache for superior fabric performance
- support for concurrent use of multiple protocols
(SCSI and IP)
- full support for FC service Class 2 and 3
- support for FC-Tape (FCP-2) devices
- 64 bit, 33MHz PCI
- end-to-end parity protection for high data integrity
- buffered data architecture to support up to 100km cabling
- robust suite of software including IP and storage protocols under
Windows 2000, Windows NT, HP-UX, Linux, NetWare, Solaris and AIX
- GBIC or embedded physical interfaces
|
|
Description The LightPulse™ LP8000 Fibre
Channel PCI host bus adapters deliver exceptional performance through
the use of Emulex’s Dragonfly ASIC, a 266MIPS onboard processor and
state of the art dual-ported buffer memory. The LP8000 features a 64 bit
PCI interface and provides the richest set of features available.
The LP8000 is designed to support mission-critical enterprise
applications. The LP8000 provides a unique combination of features,
including switched fabric support using F_Port and FL_Port connections,
full-duplex data transfers, high data integrity features, support for
all Fibre Channel topologies and support for service class 2 and 3.
The LP8000 also features sophisticated hardware that provides
superior performance in storage area networks, delivering low latency
and high throughput in switched, arbitrated loop and clustered
environments. Support for both copper and fiber optic cabling is
provided through standard GBIC or embedded interfaces.
Driver Support
The LightPulse™ LP8000 is complemented by a rich suite of software
support including storage protocol (SCSI), network protocol (IP) as well
as concurrent multi-protocol (SCSI & IP) operation, enabling advanced
storage area network (SAN) implementations in Windows 2000, Windows NT,
HP-UX, Linux, NetWare, Solaris and AIX environments. All drivers are
also fully compatible with the Emulex LP9002L, LP9000, LP7000E, LP952L
and LP850 host bus adapters.
|
|
|
standards
ANSI Fibre Channel FC-PH
ANSI Fibre Channel FC-AL
ANSI Fibre Channel FC-PLDA
ANSI Fibre Channel FC-FLA
PCI local bus revision 2.1
Fibre Channel Class 2, 3
PHP hot plug - hot swap
gigabit interface converter (GBIC)
architecture
Emulex Dragonfly ASIC technology
up to 33MHz PCI bus master DMA
512KB FLASH memory
1MB code RAM
256KB buffer RAM
software environments
Windows 2000
Windows NT
NetWare
HP-UX
Linux
Solaris
AIX
hardware environments
x86, SPARC & PowerPC PCI hardware
platforms
3.3V signaling, 5V tolerant
copper
| data rate: |
1.0625 Gb/s |
| cable type: |
dual twinax or quad axial |
| connector: |
DB9 |
| distance: |
30 meters (98') |
optical
| data rate: |
1.0625 Gb/s |
| optics: |
short/long wave lasers |
| cable: |
9/125 µm single-mode fiber |
| |
50/125 µm multi-mode fiber |
| |
62.5/125 µm multi-mode
fiber |
| connector: |
dual SC |
| distance: |
10K meters (32,800') 9/125
µm fiber |
| |
500 meters (1640') 50/125
µm fiber |
| |
300 meters (984') 62.5/125
µm fiber |
|
physical dimensions
short PCI form factor
174.75mm x 106.68mm
(6.88" X 4.20")
power requirements
| volts: |
5 VDC |
| power: |
10 watts typical |
environmental conditions
| operating temperature: |
0° to 45°C (32° to 113°F) |
| airflow required: |
100 LF/m |
storage temperature
-10° to 55°C (14° to 131°F)
relative humidity
5% to 95% non-condensing
Agency Approvals
Class 1 Laser Product per DHHS 21CFR (J) & EN60825
UL recognized to UL 1950
CUR recognized to CSA22.2, No. 950
TUV certified to EN60950
FCC rules, Part 15, Class B*
ICES–003, Class B*
EMC Directive 89/336/EEC (CE Mark)
EN55022, Class B*
EN55024
Australian EMC Framework (C–Tick Mark)
AS/NZS 3548, Class B*
VCCI, Class B*
Ordering Information
| LP8000-F1 |
embedded multi-mode optic
interface |
| LP8000-N1 |
multi-mode optic GBIC
interface |
.
|
|
|
