|
HBA's & Switches
Emulex HBA's
 Sunstar Company
is proud to be an Emulex partner!
LP9002C 2Gb/s Fibre cPCI Host
Bus Adapter
 |
Major Features
- 3U CompactPCI form factor (100mm x 160mm)
- Simultaneous full duplex 2Gb/s Fibre Channel
- Full fabric support using F_Port and FL_Port connections
- Onboard hardware context cache for superior fabric performance
- Support for concurrent use of multiple protocols (SCSI and IP)
- Full support for FC service class 2 and 3
- Support for FC-Tape (FCP-2) devices
- 32 and 64 bit CompactPCI support
- End-to-end parity protection for high data integrity
- Buffered data architecture to support up to 50km cabling at full
2Gb/s bandwidth
- Automatic speed negotiation
- Automatic topology detection
- Optical small form factor (LC) interface support
|
|
The LightPulse™ LP9002C Fibre Channel CompactPCI (cPCI) host bus
adapter combines the new generation features and functionality of the
2Gb/s low profile LP9002L with the rugged Eurocard mechanics of the
CompactPCI architecture. Like the LP9002L, the LP9002C provides support
for 2Gb/s Fibre Channel data rates, delivering the industry’s highest
performance. The LP9002C features automatic speed negotiation capability
which allows complete compatibility with existing 1Gb/s Fibre Channel
storage area networks (SANs), and allows seamless upgrades to higher
speed 2Gb/s SANs.
The LP9002C provides the flexibility and broad interoperability
needed for complex and highly scalable SANs. The LP9002C provides a
unique combination of features, including switched fabric support using
F_Port and FL_Port connections, full-duplex data transfers, high data
integrity features, support for all Fibre Channel topologies, and
support for service class 2 and 3.
LP9002C also features sophisticated hardware that provides superior
performance in SANs, delivering low latency and high throughput in
switched fabric, arbitrated loop and clustered environments. Support for
fiber optic cabling is provided through a small form factor (LC) optical
embedded interface.
The LightPulse™ LP9002C is complemented by a rich suite of software
support including storage protocol (SCSI), network protocol (IP) as well
as concurrent multi-protocol (SCSI & IP) operation, enabling advanced
Storage Area Network (SAN) implementations in the Solaris environment.
The LP9002C driver is also fully compatible with the Emulex LP9002L,
LP9000, LP8000, LP7000E, LP952L and LP850 PCI host bus adapters. It also
shares a commmon source base with drivers for the LP9002S and LP8000S,
allowing a common look and feel across separate hardware platforms.
|
Standards
ANSI Fibre Channel
FC-PH
ANSI Fibre Channel FC-AL
ANSI Fibre Channel FC-PLDA
ANSI Fibre Channel FC-FLA
CompactPCI Specification
Fibre Channel Class 2, 3
Architecture
Emulex Centaur ASIC
technology
2MB FLASH memory
1MB code RAM
256KB buffer RAM
Software Environments
Initial deployment -
Solaris (Sparc)
Hardware Environments
Sun Fire servers
3800, 4800, 4810
Optical
|
Data
Rates: |
1.0625Gb/s / 2.125Gb/s |
|
Optics: |
Short
wave lasers |
|
Cable: |
50/125µm multi-mode fiber |
| |
62.5/125µm multi-mode fiber |
|
Connector Type: |
LC |
|
Distance (1 Gb/s) |
500
meters (1640') 50/125 µm fiber |
| |
300
meters (984') 62.5/125 µm fiber |
|
Distance (2 Gb/s) |
300
meters (984') 50/125 µm fiber |
| |
150
meters (492') 62.5/125 µm fiber |
Physical Dimensions
3U cPCI form factor
100mm x 160mm (4.0" x 6.4")
|
Power Requirements
|
Volts: |
+3.3VDC, +5VDC |
|
Power
|
7.2
watts typical (9.3w max) |
Environmental Conditions
|
Operating Temperature: |
0° to
45° C (32° to 113° F) |
|
Airflow Required: |
100
lfm |
Storage Temperature
-40° to 70°C (-40° to
158°F)
Relative Humidity
5% to 95%
non-condensing
Agency Approvals
|
Class
1 Laser Product per
DHHS 21CFR (J) & EN60825 |
|
UL
recognized to UL 1950 |
|
CUR
recognized to CSA22.2, No. 950 |
|
TUV
certified to EN60950 |
|
FCC
rules, Part 15, Class A |
|
Industry Canada, ICES–003, Class A |
|
EMC
Directive 89/336/EEC (CE Mark) |
|
-
EN55022, ClassA |
|
-
EN55024 |
|
Australian EMC Framework (C–Tick Mark) |
|
-
AS/NZS 3548: 1994, Class A |
|
VCCI,
Class A |
|
|
Ordering Information
|
LP9002C–F2 |
Embedded multi-mode optic interface |
|
LP9002C–X2 |
Embedded single-mode optic interface |
|
|
|
