Do you see the drive that you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find your drive, please
click here?
541DX® DMA 100 5400 RPM:
The Maxtor 541DX is the latest in the
new family of Maxtor single-platter 5400 RPM hard drives designed for
higher reliability. It’s inner diameter load/unload ramp locks the
recording head into a protective carrier to cradle the head during
shipment and any other time the drive is not in operation. The Maxtor
541DX is the industry’s first 20GB capacity single-head/single-platter
hard drive with an Ultra ATA/100 interface. Because they combine value and
performance, these drives are excellent choices for entry-level desktop
systems and consumer electronics applications. The 541DX drives
provide field-proven quality and reliability, and include Maxtor Silent
Store™ for unsurpassed data integrity. When your application
calls for a cost-effective, high-performance storage solution, select the
541DX series by Maxtor.
Model Number
Actual Cyls
Max
Cycls
Hds
Sect
Size
GB
2B020H1
38,792
16,383
16
63
20.0 GB
2B015H1
29,104
16,383
16
63
15.0 GB
2B010H1
19,386
16,383
16
63
10.0 GB
2B008H1
16,351
16,351
16
63
8.0 GB
2B006H1
13,328
13,328
16
63
6.0 GB
2B004H1
8,184
8,184
16
63
4.0 GB
Maxtor recommends that you use the
Auto-Detect feature in the BIOS for hard drive configuration. If your BIOS
does not utilize Auto-Detect, Maxtor recommends that you:
Manually enter the Maximum Cylinder value for the hard drive if
greater than 8.4 GB.
Manually enter the Actual Cylinder value for the hard drive if less
than 8.4 GB.
*GB = 1 billion bytes. Total accessible
capacity varies depending on operating environment.
Key Features:
Maximum Capacity of 20.0 GB
Fast ATA/Enhanced IDE compatible
Digital Signal Processor (DSP)-Based
Architecture
Ultra ATA/100 Data Transfer Rate
2 MB SDRAM Cache Buffer
< 12 ms average seek time
Cable Requirements:
An 80-Wire UDMA Interface Cable is REQUIRED for all UDMA/66/100 hard
drives. It is recommended for all UDMA/33 hard drives.
Warranty Period To Be Determined
Additional Jumper
Configuration Notice:
Maxtor ships two
styles of connectors on our hard drives. The jumper illustration on your
hard drive label and in the installation guide may appear different than
the actual connector on the drive.
This addendum
illustrates both connector styles and the correct jumper settings.
If you have an older system BIOS that
does not address capacities over 2.1GB (BIOS dated pre 1995, or if you are
experiencing system hang conditions) you will need to close the 4092
cylinder limit jumper in conjunction with your drive selection of Master,
Slave or Cable Select.
Do you see the drive that you are looking for?
If so please contact us at 800-663-5523 or click
here.
If you can't seem to find your drive, please
click here?
