|
Throughput per hour, native (uncompressed): |
(maximum
configuration 2 drives)
LTO Ultrium Gen 1 (15 MB/sec) - 108.0 GB/hr
LTO Ultrium Gen 2 (30 MB/sec) - 216.0 GB/hr
LTO Ultrium Gen 3 (80 MB/sec) - 57.0 GB/hr
SDLT 320 (16 MB/sec) - 115.2 GB/hr
SDLT 600 (36 MB/sec) - 259.2 GB/hr
|
| Audit
time: |
<2 min
|
| Average
cell to drive time: |
10.5 sec
|
| Capacity,
native (uncompressed): |
(maximum
configuration 20 cartridges)
LTO Gen 1 (100 GB/cart) - 2.0 TB
LTO Gen 2 (200 GB/cart) - 4.0 TB
LTO Gen 3 (400 GB/cart) - 8.0 TB
SDLT 320 (160 GB/cart) - 3.2 TB
SDLT 600 (300 GB/cart) - 6.0 TB
|
| Number of
cartridge slots: |
10, 20
|
| Number of
tape drives / types: |
1-2 LTO
Gen 1, 2, 3; SDLT 320, SDLT 600 drives or a combination
|
| Cartridge
access port (CAP): |
Optional,
configurable, single-cartridge slot
|
| Mean
exchanges / swaps between failure (MEBF/MSBF): |
2,000,000
|
| Mean time
between failures (MTBF): |
360,000
hr (full operation)
|
| Mean time
to repair (MTTR): |
<30 min
|
|
Non-disruptive serviceability: |
Hot-swappable drives with power supply and fan, plus Ethernet and
serial ports for diagnostics and reporting.
|
| Supported
host platforms: |
UNIX,
Windows NT, Novell NetWare
|
| Robotics
control interfaces: |
LVD or
HVD SCSI
|
| Any
Cartridge Any Slot™ technology: |
Simultaneous non-partitioned support of multiple tape and media
types
|
| Library
Admin software: |
Remote
library monitoring and maintenance (optional)
|
| Library
Manager software: |
Central
management, sharing and robotivs control for SCSI-attached libraries
(optional)
|
| Framework
Library Monitor software: |
Host-based and over SCSI. Monitor and respond to library via leading
system management frameworks (SMFs) (optional)
|
| Library
Status Tool software: |
Embedded
software for remote monitoring and diagnostics of entire system
|
| SNMP: |
Embedded
SNMP agent that enables remote reporting, monitoring and
notification via standard Ethernet connection
|
| Digital
vision system: |
Unique
digital vision camera system performs continuous calibration and
reads bar codes
|
| Operator
panel: |
User-friendly configuration and diagnostic controls, status display
and viewing window
|
| Automatic
clean: |
Dedicated
cleaning cartridge slot for tape drive cleaning by library or
software command
|
| Automatic
self discovery: |
Self-configures the drives, slots and CAP. Also identifies drive and
media types
|
|
Continuous automation calibration: |
No
periodic maintenance or alignment required
|
| Height: |
7.0 in
(17.8 cm)
|
| Depth: |
27.5 in
(71.1 cm)
|
| Width: |
19.0 in
(48.3 cm)
|
| Unit
height: |
4u* of
standard 19 inch rack space
|
| Weight: |
48.0 lb
(21.8 kg)
|
|
Temperature (operating): |
+50° to
+104° F (+10° to +40° C)
|
|
Temperature (non-operating): |
+50° to
+104° F (+10° to +40° C)
|
| Relative
humidity (operating): |
20%-80%
|
| Relative
humidity (non-operating): |
10%-95%
|
| Voltage: |
100–240
VAC @ 50–60 Hz single phase (auto-ranging)
|
| Library
(operating maximum continuous - not peak): |
1.40 A @
120 V, 0.75 A @ 240 V, 180 V or 0.18 KVA, 615 BTU/hr
|
| Optional
internal FC/SCSI router: |
28 VA
|
| Drives: |
Drive
power consumption varies. Refer to individual drive specifications
|
|
Electromagnetic compliance: |
EN
50082-1, including IEC 801-2, IEC 801-3, IEC 801-4
VCC Class I
|
| Safety: |
CSA
standard CAN/CSA-C22.2, no.950-95; UL listed to UL 1950, 3rd
Edition; GS licensed to EN 60950, 2nd Edition, 1991 + A1, A2, A3, A4
Nemko, Semko, Demko, Finko certified to EN 60950, (1992)
A1/A2/A3/A4/A11, EMKO-TSE (74-SEC) 207/94; CB test certified
|
|
Emissions: |
FCC #47,
part 15, subpart B, class A; VCCI class A European Union CE
emissions standards AS/NZS 3548; 1996 (Australia, N.Z.); ICES-003
(Canada)
|
| Immunity: |
European
Union CE immunity standards |
Sunstar is proud to be a StorageTek partner!
